Skip to content Skip to navigation menu
For axial reinforcement (bending forces) of thin-walled, high-strength resin laminates. The circular woven carbon UD stockinette contains an elastic weft thread, allowing the carbon threads to keep a 0° orientation independently of their diameter. These carbon UD stockinettes were designed specifically for use with acrylic resins (e.g. 617H55 C-Orthocryl®). The advantage of the carbon UD stockinette is that for shaped models, cutting or forming is not needed to the extent it is needed with other carbon fibre cloth. Thanks to the elastic weft thread, the carbon UD stockinette adapts to the model. This can help save a lot of valuable working time during the fabrication of resin laminates. Note: if the resin laminate is to have radial strength (torsional forces), additional reinforcement materials are required. In this case we recommend using our 616G15 carbon fibre stockinette. If the laminate is to have radial strength (torsional forces), additional reinforcement materials are required. In this case we recommend using our 616G15 carbon fibre stockinette.

Carbon-UD Stockinette

Item #: 616H20

Product Details
For axial reinforcement (bending forces) of thin-walled, high-strength resin laminates. The circular woven carbon UD stockinette contains an elastic weft thread, allowing the carbon threads to keep a 0° orientation independently of their diameter. These carbon UD stockinettes were designed specifically for use with acrylic resins (e.g. 617H55 C-Orthocryl®). The advantage of the carbon UD stockinette is that for shaped models, cutting or forming is not needed to the extent it is needed with other carbon fibre cloth. Thanks to the elastic weft thread, the carbon UD stockinette adapts to the model. This can help save a lot of valuable working time during the fabrication of resin laminates. Note: if the resin laminate is to have radial strength (torsional forces), additional reinforcement materials are required. In this case we recommend using our 616G15 carbon fibre stockinette. If the laminate is to have radial strength (torsional forces), additional reinforcement materials are required. In this case we recommend using our 616G15 carbon fibre stockinette.